The best in class OPTICAM wire-cutting module fully integrated in hyperCAD®-S

OPTICAM can create efficient and flexible NC programs for wire EDM processes regard­less of whether it involves simple 2‑axis movements or complex 4‑axis movements. OPEN MIND now offers the proven OPTICAM wire-cutting module with­in its hyperCAD®-S CAD software.

Wire EDM works according to the principle of spark erosion and is also referred to as spark erosion or wire cutting. Electro-thermal separation processes are available as an alternative to cutting processes when a low mechanical strain is required to manufacture highly complex geometries. High-precision CNC machines move the tool wire (cathode) with extreme positional accuracy and cut a programmed contour in the work­piece (anode) using spark erosion.

The proven solution for wire EDM

OPTICAM CAM software is used to operate wire electrical dis­charge machines efficiently and safely. OPTICAM has extensive functions and uses the technology data­bases from all major manufacturers and up-to-date post­processors to solve any problem that may be encountered in wire EDM area.

OPEN MIND now provides the fully integrated OPTICAM wire EDM solution in hyperCAD®-S. As a modern ‘CAD for CAM’ environment, the hyperCAD®-S CAD system speeds up programming work. It is possible to create milling, mill/turning and wire EDM programs on a single model. All the user needs to do is switch between the OPTICAM wire-cutting module and hyperMILL® CAM software.

The OPTICAM solution meets all user requirements with regard to integration, reliability and user friendliness. This integration makes it a certified product for hyperCAD®-S.

Benefits

  • Simple and fast programming of wire electrical discharge machines
  • Integrated in a power­ful CAD system that allows 3D data to be easily prepared
  • Extensive strategies for wire electrical discharge machines with two to four axes
  • User-defined strategies can be saved as templates
  • Automatic feature generation
  • Use of feature information

Brochure

 –
Wire cutting

CAD Integration: OPTICAM in hyperCAD®-S

/fileadmin/user_upload/pdf/cam/wire-edm/bro-wire-cutting-opticam-in-hypercad-s-en.pdf

Features of wire EDM

Feature recognition

Features are automatically linked to the NC pro­gram: During component analysis, wire geo­met­ries are reliably recognized as features. Faces or edges can also be chosen manually for the wire EDM. Specific areas can be chosen for the cre­a­ti­on of user-defined features. The optimal ma­chi­ning strategy is identified for each feature and immediately defined using extensive te­chno­lo­gy data­bases.

  • Automatic feature generation
  • Use of feature information
  • Undercut control
  • Maximum conicity control
Simulation

The tool­paths can be reliably checked in a 3D simulation. Collision-checked machine and removal simulation makes it possible to closely monitor the work­space and provides a high degree of safety. The path off-setting, clamps and machine heads are all displayed. The cutting time can be quickly and easily calculated for each wire EDM operation. This ensures that machining times can be planned perfectly.

Technology data­bases

The OPTICAM module is continuously adapted to work in synergy with the latest functions of wire electrical discharge machines. Thanks to its extensive range of functions, the module is the market leader in the field of wire cutting and is recommended by many renowned machine manufacturers. The technology data­bases are always up to date as they come directly from the machine tool manufacturer.

Post­processors

The post­processors are constantly being upgraded by the OPTICAM manufacturer, Camtek. Camtek is always in close cooperation with the machine manufacturers and this ensures that the post­processors are always up-to-date and reliable.

Optimal strategies

The right strategies for every feature: The opti­mal machining strategies are identified and im­me­di­a­te­ly defined using extensive technology data­bases based on their suitability for the ma­chi­ning job. Faces or edges can also be chosen manually for the wire EDM of only specific areas or for the creation of user-defined features. All cuts are shown in the cuts dialog. Tool­paths can be changed after­wards.

Wire EDM strategies:

  • Cylindrical machining
  • Constant and variable taper – also on cylindrical components
  • Ruled face machining with automatic synchronization
  • Inclined machining
  • Automatic threading and cutting of wires
  • Diagonal threading
  • Automatic positioning
  • Automatic clustering of identical geometries
  • Multi-part programming
  • Variable reference plane height

Strategies for efficient and reliable wire EDM

  • Supervised and un­supervised day and night operation
  • Punch strategies
  • Reverse cutting
  • Automatic cutting-off of slugs
  • User-defined strategies can be saved as templates
Pocketing

Machine down­time and manual intervention all cost money. The solution to this problem is efficient pocketing without slugs using the following strategies: cylindrical and conical pocketing, 4‑axis ruled face pocketing*, partial pocketing of geometry sections*
*Module is optionally available

Collar machining

Projection at a freely definable angle makes it possible to machine variable reference plane heights. This allows a constant, cylindrical collar with a uniform height to be created on the work­piece.

Ruled face pocketing

This strategy makes it possible to machine ruled faces without slugs. This significantly reduces programming work and allows un­supervised machining.

Partial pocketing

Allows conventional roughing and pocketing to be combined.

Corner relief

Allows targeted control of the tool­path in sharp interior corners. Five types of corner relief are available with­out having to spend time changing the model.

Events and segments

Key comments or useful machine instructions can be quickly and easily inserted using event points. Machining operations are divided into individual segments. This way, it is possible to set the number of cuts, offset values, lead on and lead off technologies or partial pocketing separately.

Lead on/lead off

Lead on and lead off technologies can be programmed, including: straight, at an angle, arc-shaped and meander-shaped with the option to overrun the cutting contour.

Start holes and tags

OPTICAM always calculates the optimal start holes and tags, regard­less of whether this is fully per­for­med automatically and optimized, pre-defined on the basis of the design or selected manually. Any pre-defined start hole geometries are taken into account. The type, position and number of tags can be defined automatically or manually. Triangular and multiple tags can also be created with multiple start holes.

mobile-s mobile-m mobile-l tablet desktop-s desktop-m desktop-l desktop-xl